Patton CL2300E Ruggedized


The CL2300E is Patton’s extended temperature, ruggedized version of the CL2300.  A long-range copper Ethernet Extender, employing wire-bonding technology to combine up to 4 wire pairs into a single Ethernet connection, these Patton units offer unsurpassed speed and distance performance over copper.  Even in hot, cold, or humid conditions, the CL2300E interconnects your IP-enabled devices over any existing copper infrastructure.


Patton’s robust and reliable CopperLink 2300E Light Industrial Ethernet Extender delivers bandwidth greater than 60 Mbps in point to-point topologies. Extend Ethernet segments to IP-enabled devices or remote LANs using existing copper infrastructure. Often used for LRE (Long Range Ethernet), the CL2300 is also an excellent solution for point-to-point connectivity for noisy environments or questionable cable quality.

CL2302E/4ETH/DC CopperLink 2 Pair (4-Wire) Light Industrial Ethernet Extender; -40 to 85°C; RJ45 Female Line (8-position); 4 x 10/100BaseTX; 12-48VDC

CL2302E/CC/4ETH/DC CopperLink 2 Pair (4-Wire) Light Industrial Ethernet Extender; -40 to 85°C; Corrosion Protection; RJ45 Female Line (8-position); 4 x 10/100BaseTX; 12-48VDC

Each pair provides bandwidth ranging from 5.7 Mbps to 15.3 Mbps depending on segment length.

1 Pair: 5.7 to 15.3 Mbps
2 Pair: 11.4 to 30.6 Mbps
3 Pair: 17.1 to 45.9 Mbps
4 Pair: 22.8 to 61.2 Mbps

Realize fiber-optic speeds without the expense—and hassle—of installing new cables or line-of-sight wireless circuits.  Since the units are Plug and Play you can set these units up straight out of the box. No configuration is required. Auto-sensing 10/100 Ethernet ports support full or half duplex operation.  You can easily use the Switch-selectable rate mode options optimize rate and reach for the noise environment, wire gauge/type and length.  The CL2300E, transparently passes all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged).

Made in the USA — This Patton equipment is designed by Patton engineers and built in Gaithersburg, Maryland facility. Patton’s American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.