Patton 2151 Ethernet Extenders
Data rates up to 15 Mbps
2151/EUI-2PK CopperLink Multi Rate 16 Mbps Dual Port Ethernet Extender Kit (1 Local Unit and 1 Remote Unit);RJ45 Connectors only; 100-240VA
2151/E-SKD CopperLink 16Mbps PCB Extender (Local); RJ45
2151/EUI CopperLink Multi Rate 16 Mbps Dual Port Ethernet Extender; RJ45 Connectors only; 100-240 VAC
For NEW INSTALATIONS we recommend the Patton CL1214 units
The Patton 2151 Multi-Rate CopperLink Ethernet Extender enables the utilization of existing copper infrastructure for high speed Ethernet extensions at data rates up to 15 Mbps. The Patton 2151 includes asymmetrical and symmetrical settings for increasing the distance or speed of the Ethernet connections.
CopperLink applications include Ethernet extension, medical imaging, video-conferencing, and inter-connecting remote devices or remote networks to a central LAN. The multi-rate symmetrical line rates ensure the highest possible data rate is achieved over various lengths and types of copper wire and environments. Multi-rate asymmetrical line rates make the Patton 2151 the ideal solution for service providers who want to differentiate their services or extend the reach of their customer base. The Patton 2151 allows service providers to offer unparalleled performance for such applications as always on Internet access, real-time bi-directional video streaming, and various multimedia applications.
If you want to take your network and voice connections farther and faster over existing copper and eliminate the expense of fiber, Patton’s CopperLink Ethernet Extenders are the products for you! Just plug, power, and play!
· Ethernet Extension–Extends 10/100 Base-TX Ethernet distances 1 mile using 2-wire 24 AWG unconditioned lines.
· Seamlessly Connect and Extend the LAN–802.3 10/100Base-TX LAN connection via built-in shielded RJ-45 port.
· CopperLink 2-Wire Connection–Easy 2-wire CopperLink connection via built-in RJ-45 port or terminal block.
· Switch Selectable–Asymmetrical or Symmetrical line rates up to 15 Mbps!
· Dual Auto-sensing Full-Duplex Ethernet–Auto 10 or 100Base-T and full or half-duplex Ethernet operational.
· Transparent LAN Bridging–Passes higher layer protocols and supports 802.1Q VLAN tagging.
· Automatic Learning, Aging, and Filtering–Only allows packets with addresses outside the LAN to be forwarded.
Workgroup Ethernet extension application
Ethernet Extender allows copper instead of fiber for vertical Ethernet spans!
These multi-rate Ethernet Extenders are ideal for bridging Ethernet spans inside buildings that are beyond the 328-foot (100-meter) distance limit of Ethernet.
For example, connecting remote LANs located on different floors in a building over already existing telephone-grade twisted pair.
CopperLink Line Interface
RJ-45 (pin 4 = ring; pin 5 = tip) and two-position removable terminal block (supports 19-26 AWG or 0.9-0.4 mm wire)
8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation. DIP switch capable of disabling 100-Mbps full-duplex for equipment that does not support 802.3X (Pause Packets)
Transparent to high layer protocol. Supports 802.1Q VLAN tagging
Discrete multitone modulation (DMT)
CopperLink line rate: Up to 15 Mbps
Front Panel Indicators
Power, CopperLink and QOL (quality of link), Ethernet Link and Activity Status
1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)
0.4 lbs (0.18 kg) without power supply
External AC and DC options: 120VAC, and universal input (UI)–100–240 VAC, or optional -48 VDC, -24 VDC, or -12 VDC
Temperature: 32-122°F ( 0-50°C)
Humidity: Up to 90% non-condensing
FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC