Patton 2089

Patton 2089 Interface Converter

Patton_2089
Interface Powered, RS-232 (EIA-574) to RS-485
Patton 2089 Interface Converter (with Handshaking)

2089F RS232/RS485 CONVERTER, DB9F
2089F RJ11 RS232/RS485 CONVERTER,DB9F/RJ11
2089F RJ45 RS232/RS485 CONVERTER,DB9F/RJ45

Connect RS-485 Data Acquisition & Control Equipment to a DB-9 (RS-232) Equipped PC or Workstation using the Patton 2089

Fully Conforms to the EIA RS-485 Standard
Data Rates to 115,200 bps
Range Up to 9 Miles (14.5 Km)
No AC Power or Batteries Required
Up to 50 Terminal Drops in a Multipoint Polling Environment
600 Watts of Silicon Avalanche Diode Surge Protection – Standard
The Patton 2089 is Patton’s first high speed EIA-574 (RS-232 on a DB-9) to RS-485 interface converter. Supporting async data rates to 115.2 kbps over one or two unconditioned twisted pair, the Patton 2089 passes one control signal in each direction. The Patton 2089 can handle up to 50 terminal drops in a multipoint polling environment; yet it is small enough to plug directly into a DB-9 serial port and requires no AC power or batteries for operation. The Patton 2089 has five configuration parameters, allowing the unit to be fine tuned to a variety of point-to-point or multipoint applications. Silicon Avalanche Diode surge protection is standard as well. Amazing!

Transmission Format: Asynchronous
Data Rate: Up to 115,200 bps
Range: Up to 9 miles (14.5km)
EIA-574 Interface: DB-9, male or female
RS-485 Interface Options: RJ-11 or RJ-45 jack, terminal block with strain relief
Transmit Line: 2, 4 wire unconditioned twisted pair
Transmit Mode: 4-wire, full or half duplex; 2-wire half duplex
Control Signals: DSR turns ON immediately after the terminal raises DTR; DCD turns ON after recognizing the receive signal from the line; CTS turns ON after the terminal raises RTS.
RTS/CTS Delay: 0 or 8 msec
Carrier: The carrier is switch selected either continuous operation or controlled by RTS
Surge Protection: 600W power dissipation at 1 mS
Power: Draws operating power from EIA-574 data and control signals; no AC power or batteries required.
Temperature: 32º to 122º F (0º to 50º C)
Size: 2.50″ x 1.20″ x 0.75″ (6.4 x 3.0 x 1.9 cm)

You can always call for a quick quote.

If you like the price, you can order right over the phone.