Esteem 195C Ethernet Radio

ESTeem Model 195C UHF 450-470MHz wireless radios are the perfect solution for rigorous Industrial, Public Safety, and Federal applications. Providing Ethernet, Serial RS-232C, RS-422, RS485 and 4 Channel Sensor Interfaces in a single wireless unit, the Model 195C industrial modem is a narrowband compliant licensed radio with downward compatibility to the ESTeem Model 192C/CHP series.

The 195C operates well in a wide range of modes, including point to point wireless bridge, point to multipoint and repeater modes.

Depending on the type of antenna chosen, these Ethernet/serial radios provide reliable communications over distances greater than 10 miles in high noise. Wireless networks over large geographical areas can be a reality using the internal Digi-Repeating feature, which creates possible repeater sites using any remote locations.

10+ Mile Nominal Range
Industrial Hardened Case
Direct Outdoor Pole Mountable
Extended Temperature Specifications
Ethernet Communications Port
Serial RS-232 Communications Port
Rs-422 and RS-485 Communications Port
4 Channels of 4/20mA Sensor Input

Modes of Operation

Ethernet Bridge Mode
Point-to-Point
Point-to-Multipoint
Repeater Modes
Legacy Product Support with Model 192C and 192CHP
Software Features

Pole Mounting. Our Ethernet/serial radios support remote pole mounting to greatly reduce the installation cost and increase wireless performance.
Protocol Emulations. 195C has protocol drivers for most major PLC manufacturers, providing transparent operation of the controllers without affecting the unit’s remote capabilities.
Multiple Repeaters. The 195C industrial modem supports multiple repeaters in a single network, and all remote 195C wireless radios can be used as repeaters.
Multiple Modes of Operation. The 195C can function as a Master, Remote, Repeater, or Remote/Repeater node for added flexibility.
Model 192 Series Compatibility. The 195C is downward compatible to operate as a remote in a serial network with the ESTeem Models 192C or 192CHP.
Spectrum Analyzer. The 195C and Software Configuration utility provide a full feature spectrum analyzer for the 450-470 MHz frequency band.