DCE/FiberT Fiber T1 Extenders
This product will extend a T1 across multimode fiber up to 2KM. Models for greater distances and for single mode fiber are also available.
Simply set up one DCE Fiber T1 Extender at each end of your fiber run, and you are set to go.
Standards: T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403
Interfaces: RJ48c 100ohm balanced T1 connector and dual SC 155M fiber port
Operating wavelength: 1310nm multimode
Operating distance: 2Km on 62.5/125um fiber, works also on 50/125um fiber
Optical connector: SC dual type (versions with ST or FC optical connectors are available on request)
Front LEDs: Power, Fiber Link, T1 Link, Test mode
Power: External 90-260V AC switching adapter 9VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:” 50°C (Operating); 70°C (Storage)
Humidity: 20” 80% non condensing (Operating); 90% (Storage)
Consumption: less than 5W
Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm
Weight: 310g (without AC adapter)
Compliance: CE, FCC Class A
MTBF: 65,000 hours
We have units that will extend multiple T1’s over fiber
We have units that will extend a T1 over copper