Starcomm Data Connect

Starcomm 2400E-030-4 Stand alone 2-wire Dial 2 or 4-wire Leased Line Modem

StarComm Low Speed Modems – All low speed models offer an AT compatible command interface and support The following modulation standards: V.22bis, V.22, V.21, Bell 212A and Bell 103J.

2400E-030-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc with 115 VAC power adapter

SC-HVC Power adapter for all 5.5 to 14VDC modems. Inline Power Supply is 60 to 300 VDC or 100 to 240 VAC Power Cords

You can always call for a quick quote.
If you like the price, you can order right over the phone.

Standard 2-Wire Dial-up
AT Command Set
Standard Error Correction and Compression
RS232 Terminal Interfaces
Asynchronous DTE Support

V.22bis, V.22, Bell 212A

DTE Interface:
RS232C (V.24), Synchronous or Asynchronous – Autobaud or selectable formats and rates to 4.8Kbps

Auto Dial Modes:
Standard AT compatible dial commands or DTR dial or stored number

Answer Modes:
Standard auto answer or manual answer under DTE control

Error Correction:
V.42 and MNP 2-4 error correction

Data Compression:
V.42bis and MNP5 data compression

Configurable Control:
Standard AT commands for both local and remote configurations

V.54 through AT commands

Network Interface:
Dial-up – 2-wire Pulse or DTMF
– XMT level – 12dBm
– RCV sensitivity – 43dBm

Standalone single-port
Standard units automatically adjust to 9VAC or 9-14VDC

Rackmount –
Standard CC-2016 rack automatically adjusts to 85-265VAC, 27-440Hz. Optional DC Supply automatically adjusts to positive or negative 36-75VDC

Commercial Unit
Operating temperature range 20°C to +70°C
Humidity – 90% non-condensing
Industrial Unit
Operating temperature range -40°C to +85°C
Humidity – 95% non-condensing

FCC Part 68 & Part 15, Class A
Optional International approvals are available

Commercial Unit
Dimensions 5.30”L x 5.05”W x 1.53”H
Weight – 12oz Rackmount Unit
Fits CC-2016 rack 4.73”L x 4.60”W x 80”H