Planet SGSW-24040HP

Low Cost 24-Port PoE Switch
10/100/1000Mbps Managed Stackable Switch
with 4 Shared SFP 802.3at PoE

Planet_24Port_PoE_Switch

What we love about Planet Products is the high performance and
LOW COST $595

If you like the price, you can order right over the phone.

Price&Info_Contact

For higher power PoE network applications with Gigabit speed transmission, PLANET introduces the SGSW-24040HP. This 24-Port Gigabit High Power over Ethernet Managed Switch features high performance Gigabit IEEE 802.3af PoE (Up to 15.4W) and IEEE 802.3at High-Power PoE (Up to 30.8W) on all ports.

By supporting reliable stacking technology and advanced networking features, SGSW-24040HP also provides high scalability for current and future network infrastructure as it can flexibly work with PLANET SGSW series Gigabit Switches.

A maximum of 30.8 Watts is available on the Gigabit ports of the SGSW-24040HP for powered devices, with a maximum PoE delivery of 360 Watts for all ports. Providing Gigabit throughput and high power the SGSW-24040HP optimizes the installation and power management of devices like 11n wireless access points (AP), network video cameras, large screen PoE Video phones, thin-clients, etc.

The SGSW-24040HP provides a built-in SMTP and SNMP Trap alarm function that can send instant alarm to the administrators by email when errors happen (like when the connected PD devices change, or when the Ethernet cable is disconnected. The switch also records when the error happens and the recovery status.

The PoE schedule function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals to help conserve power and save money.

The SGSW-24040HP supports both IPv4 and IPv6 management functions.

The SGSW-24040HP provides 2 dedicated High-Speed HDMI-like interfaces for stacking. With up to 16 units of stacking, 384 Gigabit PoE ports can be managed.

The SGSW-24040HP can be programmed for advanced switch management functions such as dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP Snooping. The SGSW-24040HP provides 802.1Q Tagged VLAN, with up to 255 VLAN groups allowed.

For efficient management, the SGSW-24040HP is equipped with console, WEB and SNMP management interfaces. With the built-in Web-Based management interface, the SGSW-24040HP offers an easy-to-use, platform-independent management and configuration facility. The SGSW-24040HP supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the SGSW-24040HP can be accessed via Telnet and the console port. Moreover, the SGSW-24040HP offers secure remote management by supporting SSH, SSL and SNMPv3 connection which encrypt the packet content at each session.

The SGSW-24040HP offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises of 802.1X Port-Based and MAC-Based user and device authentication. With the private VLAN function, communications between edge ports can be protected to ensure user privacy. The SGSW-24040HP net Security also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

The two mini-GBIC slots built in the SGSW-24040HP support Dual-Speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, that means, the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required. The distance can be extended from 550 meters (Multi-Mode fiber) up to above 10/50/70/120 kilometers (Single-Mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

High power and high speed data switching are integrated into one unit and delivered over a single cable, the Gigabit PoE Switch also lowers the need for dedicated electrical outlets on the wall, ceiling or any unreachable place and eliminating costs and time for additional AC wiring.

Planet SGSW-24040HP Features

Physical Port
24-Port 10/100/1000Base-T Gigabit RJ-45 with IEEE 802.3af / 802.3at PoE Injector
4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-21 to Port-24
2 HDMI-like 5GbE Stacking interfaces
RS-232 DB9 console interface for Switch basic management and setup

Power over Ethernet
Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
Up to 23 IEEE 802.3af devices powered
Up to 11 IEEE 802.3at devices powered
Supports PoE Power up to 30.8 Watts for each PoE ports
Auto detect powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
PoE Management
Total PoE power budget control
Per Port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limit
PD classification detection

Stacking
Hardware stack up to 16 units and 384 Gigabit ports
Single IP address stack management
Stacking architecture supports Chain and Ring mode
Plug and Play connectivity
Mirror across stack
Link Aggregation groups spanning multiple switches in a stack
Hardware learning with MAC table synchronization across stack

Layer 2 Features
Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow
control (Full-Duplex)
High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC
filtering eliminates erroneous packets to optimize the network bandwidth
Supports VLAN
IEEE 802.1Q Tagged VLAN
Up to 255 VLANs groups, out of 4041 VLAN IDs
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
Private VLAN Edge (PVE)
Supports Spanning Tree Protocol
STP, IEEE 802.1D (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol), spanning tree by VLAN
BPDU Guard
Supports Link Aggregation
802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (Static Trunk)
Maximum 12 trunk groups, up to 16 ports per trunk group
Up to 32Gbps bandwidth (Duplex Mode)
Provide Port Mirror (many-to-1)
Port Mirroring to monitor the incoming or outgoing traffic on a particular port

Quality of Service
Ingress Shaper and Egress Rate Limit per port bandwidth control
4 priority queues on all switch ports
Traffic classification:
IEEE 802.1p CoS
TOS / DSCP / IP Precedence of IPv4/IPv6 packets
IP TCP/UDP port number
Typical network application
Strict priority and Weighted Round Robin (WRR) CoS policies
Supports QoS and In/Out bandwidth control on each port
Traffic-policing policies on the switch port
QoS Control List Wizard makes QoS creation and configuration easier and more quickly
DSCP remarking
Voice VLAN

Multicast
Supports IGMP Snooping v1, v2 and v3
Querier mode support
IGMP Snooping port filtering and throttling
Multicast VLAN Registration (MVR)

Security
IEEE 802.1X Port-Based / MAC-Based network access authentication
Built-in RADIUS client to co-operate with the RADIUS servers
TACACS+ login users access authentication
RADIUS / TACACS+ users access authentication
IP-Based Access Control List (ACL)
MAC-Based Access Control List
Source MAC / IP address binding
DHCP Snooping to filter un-trusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address
binding
IP Source Guard prevents IP spoofing attacks
Auto DoS rule to defend DoS attack
IP address access management to prevent unauthorized intruder

Management
Switch Management Interfaces
Console / Telnet Command Line Interface
Web switch management
SNMP v1, v2c, and v3 switch management
SSH / SSL secure access
Four RMON groups (history, statistics, alarms, and events)
IPv6 IP Address / NTP / DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP / TFTP
DHCP Relay and Relay Option 82
User Privilege levels control
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP) Protocol
Cable Diagnostic technology provides the mechanism to detect and report suspicious cabling
issues
Reset button for system reboot or reset to factory default
PLANET Smart Discovery Utility for deploy management
ICMPv6