Patton CL1211

Patton_CL1212

The Patton CL1211 and CL1212 are Ethernet Extenders which use Patton’s legacy form factor and run on their legacy 5VDC input.  Patton’s standard Ethernet Extenders are the CL1214, which come in a larger form factor, run on 12VDC and feature a built in 4 port switch.

The Patton CopperLink Model CL1211 can deliver IP traffic up to 1.8 miles (3 km) away—well beyond the standard 328-foot (100-meter) Ethernet distance limitation.

This is Patton’s single-port Ethernet Extender, ideal for applications requiring the enhanced security of a single Ethernet port.  With achievable line rates up to 168 Mbps, at shorter distances, the CL1211 eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies.

The Model 1211 is engineered to re-use existing infrastructure previously employed in such legacy applications as alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7.

CL1211/EUI High Speed CopperLink Ethernet Extender; 1 x 10/100BaseTX; RJ45 Line, 100-240VAC

CL1211/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 1 x 10/100BaseTX; RJ45 Line, 100-240VAC

CL1211/TB/EUI High Speed CopperLink Ethernet Extender; 1 x 10/100BaseTX; Terminal Block Line, 100-240VAC

CL1211E/EUI-2PK Extended Temperature CopperLink High Speed Auto Rate Extender Kit (Local and Remote); 1 x 10/100BaseTX; RJ45 Line Connector; 100-240VAC

CL1211E/TB/EUI-2PK Extended Temperature CopperLink High Speed Auto Rate Extender Kit (Local and Remote); 1 x 10/100BaseTX; Terminal Block Line Connector; 100-240VAC

CL1211E/TB-SKD Ethernet Extender, PCB Sub Assembly, Terminal Block Line; 1 x 10/100; No Power Supply

CL1211E-SKD Ethernet Extender, PCB Sub Assembly, RJ45 Line; 1 x 10/100; No Power Supply

CopperLink Line Interface
  • RJ-45 (pin 4 = ring; pin 5 = tip)
  • Terminal block, 2 position
CopperLink Line Modulation DMT (Discrete Multi-Tone)
Ethernet Interface 8-position, shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.  Model 1211 has one 10/100Base-TX port.
Protocol Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames.
Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG.
Target SNR Modes 6 dB and 9 dB
Management 8-position DIP switch
Monitoring 8 LEDs display Power, Link, Ethernet 1–4, Remote, and Local status.
Power Supply External AC: 100–240 VAC
Compliance FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
Environment
  • Temperature: 0 to 50°C
  • Humidity: 5 to 95%, non-condensing
  • Extended Temperature: -40 to 85°C ( CL1212E or CL1211E)
  • Extended Humidity: 5 to 85%, condensing (CL1212E/CC or CL1211E/CC)
Dimensions 4.13 W x 1.5 H x 3.15 D in. (105 W x 38.1 H x 95.3 D mm)
Weight 0.4 lbs (181 g)
MTBF 77,000 hours