Patton M-ATA M-ATA VoIP Fax Adapter / Phone Adapter Patton Patton Micro Analog Telephone Adapter Quickly and easily converts a phone or fax machine to VoIP for residential and telecommuter applications.
M-ATA-1/E Micro Analog Telephone Adapter 1 x FXS 1 x 10/ 100
The SmartLink Micro Analog Telephone Adapter provides connectivity for analog phones and faxes to a home, home office or corporate LAN. Connecting to any analog phone, fax or PBX, the SmartLink product is ay cost effective solution for small offices and telecommuters to access Internet-based telephone services and corporate intranet systems across established LAN and Internet connections like xDSL and cable modems. The M-ATA provides one Ethernet (RJ-45) port and one FXS (RJ-11) analog phone port for quick and easy interconnection to the local LAN. LEDs show at-a-glance the status of the system, LAN, WAN, and phone ports. A full suite of IP features (DHCP, NAT/PAT) are available to maximize universal connectivity. VLAN tagging and prioritization enables voice traffic to be handled before data traffic insuring higher quality voice calls. Support for PPPoE tunneling simplifies extending corporate intranet services to telecommuters. The user friendly web interface offers two levels of configuration; level one covers basic subscriber specific parameters, level two offers advanced settings for the transport network. Configuration and firmware can be downloaded from a centralized TFTP or HTTP server. The M-ATA is SIP and MGCP standard compliant. Analog phones attached to the SmartLink can use advanced calling features such as call forwarding, caller ID, 3-way calling, call holding, call retrieval and call transfer. Typical applications Patton's Micro Analog Telephone Adapter provides seamless access to Internet telephony and data services. The M-ATA connects to any broadband access provider via a cable or xDSL modem.
M-ATA-1/E Micro Analog Telephone Adapter;1 x FXS RJ11; 1 x 10/
Voice Connectivity
2-wire Loopstart, RJ-11/12
Short haul loop 1.1 km @3REN
Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation
Connectivity
1 10/100Base-TX Full Duplex/Autosensing Ethernet RJ-45
Voice Processing (signalling dependent)
SIP
MGCP
Voice CODECS
G.168 echo cancellation
2 parallel voice connections
DTMF detection and generation
Carrier tone detection and generation
Silence suppression and comfort noise
Configurable dejitter buffer
DTMF in-band & out-of-band
Configurable transmit packet length
RTP/RTCP (RFC 1889)
STUN
Fax and Modem Support
G.711 transparent FAX
T.38 Fax relay (9.6 k, 14.4 k)
Voice Services/Features
Anonymous CallerID block
Call blocking
Call forward - on busy
Call forward - selective
Call forward - unconditional
Call hold/retrieve
Call return
Call transfer - blind
Call transfer - with consultation
Call waiting/retrieval
Caller-ID
Conference drop
Conferencing (3-way calling)
Distinctive ring
Do not disturb
Hotline calling
Incoming CallerID on/off
IP URL dialing
Message waiting indication
Self-caller ID block
Speed dial
Voicemail message retrieval
Warmline calling
IP Services
NAPT
DHCP client
PPPoE
Programmable static routes
ICMP redirect (RFC 792); Packet fragmentation
VLAN support 802.1p/q
Management
Browser configuration interface
Multilevel security access
TFTP & HTTP configuration & firmware loading
SNMP v2 agent (MIB II and private MIB)
Syslog support
Operating Environment
Operating temperature: 0-40°C (32–104°F)
Operating humidity: 5-80% (non condensing) )
System
Power: 100-240 VAC (50/60 Hz)
Compliance
EMC compliance: EN55022 and EN55024
Safety compliance: EN 50950
CE compliance
FCC Part 15 Class B
Physical
Dimensions: 3.6L x 2.1W x 0.78H in. (9.0L x 5.3W x 1.9H cm)
Weight: 0.2 lbs (0.09 kg)
Patton Products Patton VoIP Products
