|
Patton 2156 CopperLink 2.3-Mbps Ethernet
Extender
-
Extend your network up to 32,000 ft. (9,754 m)
-
2.3 Mbps extension using existing twisted pair of
copper
-
Plug-and-play-No configuration necessary!
Patton 2157
CopperLink 4.6-Mbps Ethernet Extender
-
Auto-rate adaptation gives the highest rate possible
for for the extension distance of your network
-
4.6 Mbps over just a single twisted pair of copper
-
Extension distances up to 32,000 feet (10 km)
-
Auto-sensing 10/100 Ethernet port
Patton 2158
2158A
CopperLink 12.5-Mbps Ethernet Extender
-
High-speed full-duplex 12.5 Mbps communications link
-
Extends Ethernet connections up to 4,500 ft. (1,372
m)
-
Easy 2-wire CopperLink connection via built-in RJ-45
or 2-position terminal block
Patton 2168 2168A CopperLink 16.67-Mbps Multi-Rate Ethernet
Extender
-
Low cost/plug and play solution for campus wide
network extension and delivery of last-mile ISP services over
Ethernet
-
Extends Ethernet distances up to 1 mile over 2-wire
24 AWG unconditioned lines
-
Switch selectable asymmetrical or symmetrical line
rates up to 16.67 Mbps!
-
Auto-sensing 10Base-T or 100Base-TX
Patton 2172 CopperLink
50-Mbps Ethernet Extender
-
Ethernet Extension - Extends 10/100Base-TX Ethernet
up to 5,500 feet over 2-wire AWG 26 unconditioned lines.
-
Operates Over Twisted Pair - Reduces the cost and
hassles of new installations. Utilizes installed voice-grade twisted
pairs to eliminate the expense of fiber or Cat5e cabling.
-
Full-duplex data-line rate of 100 Mbps - Provides
near fiber performance for bandwidth intensive applications such as
Triple Play services.
-
Plug and Play - No configuration or cable hassles
during installation with auto-sensing 10/100, full or half duplex,
and auto MDI-X.
-
Multiple Line Rates Supported - Switch-selectable
lines rates ensure the best possible line rate for each application.
-
Asymmetric or symmetric - Adapts to service provider
and enterprise applications.
-
Transparent LAN Bridging - Passes higher layer
protocols and supports 802.1Q VLAN tagged and untagged traffic.
Patton 2172R
Ruggedized Ethernet Extender
The 2172R was designed to operate in a rugged environment, with temperature
ranges from -10 to 70°C, and the option for conformal coating protecting the
device from condensing humidity, and operates at -10 to 80°C. The 2172R’s
aluminum case design allows for users to conveniently mount them either on a
wall or DIN |
