Home Where Are Your Prices? Contact Quote Request Credit Card Form

Patton 4110 VoIP Gateway
Analog Patton 4110 VoIP Gateway with up to 8 FXS/FXO ports
 
The Patton 4110 VoIP Media Gateway supports up to eight FXS or FXO telephone connections. Connect PSTN Lines, PBXs, and standard phones for voice and fax over any IP network. Now the corporate, small, or remote office can access Internet telephony services, eliminate toll charges and route calls to and from the PSTN, Internet, or LAN.

The Patton 4110 VoIP Media Gateway supports up to eight transparent phone calls while leveraging VoIP for lower-cost carrier and corporate access. Connecting to any analog phone, fax, or PBX, the SN4110 is an effective and flexible solution for toll-bypass, remote/branch office voice connectivity, and enhanced carrier services.

The SN4110 series is the perfect choice for phone-to-IP connectivity supporting up to 8 FXS ports or a combination of 4 FXS and 2 or 4 FXO ports. With its FXS analog ports the SN4110 connects to any legacy telephone or PBX and provides dial-tone, ringing, and caller-ID. When equipped with FXO ports, the local PSTN can be accessed enabling local calling and enhanced toll-bypass applications while using a single connected telephone. Flexible call integration allows per-port telephone numbers, programmable call progress tones, and distinctive ringing. With Telephony-over-IP (ToIP) call switching, calls can automatically select the least-cost-route while providing flexible numbering plans and end-to-end feature transparency. PPPoE, DHCP, and VLAN offers universal IP connectivity and optional IPSEC VPN with AES/3DES guarantees secure voice over the public network.

Patton's SmartNode 4110 delivers the legacy phone interfaces, service transparency, and flexible PSTN integration for true converged packet voice.

 

Model


Application—Remote Office/Branch Office Voice Extension and Access
In enterprise networks, transparent access to PBX features while using existing equipment is key to low-cost operations. Now, instead of installing a separate PBX at the remote office, the SmartNode 4110 is able to provide transparent extension while simultaneously connecting multiple locations. The extensions can be managed centrally and benefit from PBX services such as calling groups, least cost routing, and call forwarding. PSTN access allows local calls to be processed without using corporate remote PBX resources. Additionally, the corporate PBX can break-out and bypass any long distance charges by using the remote office for the local gateway.

SN4112/JO/EUI Dual Port FXO VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, external UI power (100-240VAC)
SN4112/JS/EUI Dual Port FXS VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, External UI power (100-240VAC)
SN4114/2JS2JO/EUI Dual FXS, Dual FXO VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, external UI power (100-240VAC)
SN4114/JO/EUI Quad Port FXO VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP,external UI power (100-240VAC)
SN4114/JS/EUI Quad Port FXS VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, External UI power (100-240VAC)
SN4116/4JS2JO/EUI Quad FXS, Dual FXO VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, external UI power (100-240VAC)
SN4116/JS/EUI 6 Port FXS VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, external UI power (100-240VAC)
SN4118/4JS4JO/EUI Quad FXS, Quad FXO VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, external UI power (100-240VAC)
SN4118/JS/EUI 8 Port FXS VoIP/ToIP Gateway, 1x10/100baseT, H.323 and SIP, external UI power (100-240VAC)

 

Voice Connectivity • 2, 4, 6, or 8 FXS ports
  • 2-wire Loopstart, RJ-11/12
  • Short haul loop 1.1 KM @3REN
  • EuroPOTS (ETSI EG201 188)
  • Programmable AC impedence, feeding, and ring voltage; On-Hook Voltage 29VDC
  • Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation

• 2 or 4 FXO ports

  • 2-wire loop-start presented as an RJ-11/12
  • 2.5kV line isolation Surge Protection: Voice Ports: Tip & Ring protected by 270 V side actor
  • Off-hook and ring detection, Automatic line gain, Programmable ring count
  • End of Call detection, Line drop, busy tone, battery reversal detection
  • Hook-Flash Sending, H.245 Hook-Flash relay, DTMF send, detect, and relay
  • Caller ID FSK CLI reception and relay (Bellcore/ANSI and ETSI/ITU), Call routing based on Caller ID
  • Second dial-tone for two-stage DTMF dialing, Call routing based on DTMF numbers
Data Connectivity 10/100 Full Duplex, Autosensing, Ethernet RJ-45 port
Voice Processing (signalling dependent) • Voice codes
  • G.711 A-Law/΅-Law (64kbps)
  • G.726 (ADPCM 40, 32, 24, 16 kpbs)
  • G.723.1 (5.3 or 6.3 kbps)
  • G.729ab (8kbps)

• Up to 8 parallel voice connections
• G.168 echo cancellation
• Carrier tone detection and generation
• Silence suppression and comfort noise
• Configurable dejitter buffer
• Configurable tones (dial, ringing, busy)
• RTP/RTCP (RFC 1889)

Fax and Modem Support • G.711 Fax- and Modem-Bypass
• T.38 Fax relay (9.6 k, 14.4 k)
Voice Signalling • H.323v4
  • RAS, H.225, H.245
  • H.235 secure RAS
  • Fast-connect, early H.245
  • Gatekeeper autodiscovery, Alias registration
  • Overlap dialing
  • Empty capability set (call transfer, hold)
  • H.323v1 call transfer, hold

• SIPv2

  • RFC2806: URLs for Telephone Calls, RFC3261: SIP: Session Initiation Protocol
  • RFC3263: Session Initiation Protocol (SIP): Locating SIP Servers
  • draft-ietf-sip-cc-transfer-02, draft-ietf-sip-cc-transfer-05
  • draft-ietf-sip-refer-02, draft-ietf-sip-replaces-01
  • draft-ietf-sip-session-timer-04, draft-ietf-sip-session-timer-08
  • Caller ID (without CNIP), CLIR (receive from PSTN)
  • Support for proxy and redirect servers
  • RFC2833: DTMF Relay, Fax-Bypass (G.711), T.38 Fax-Relay
  • Session Timer, Record-Routing, Authentication
  • Compression CODECs, Fax/Modem bypass
Call Routing • Virtual Interfaces
• Routing Criteria: Called party number (Destination) Calling party number (Source) Time of day, day of week, date
• Longest prefix match, wildcard match, regular expression match
• Number Manipulation Functions: Replace numbers Add/remove digits Regular Expressions
• Fallback Routing: Soft Fallback to alternative interface or Call Router table
IP Services • IPv4 router
• Static Routes, ICMP redirect (RFC 792), RIPv1, v2 (RFC 1058 and 2453)
• DiffServe/ToS Packet labeling
• 802.1p VLAN tagging
• Access Control Lists
• IPSEC AH & ESP Modes, preshared Keys
• AES/DES/3DES Encryption
Management • Web GUI
• Industry standard CLI with local console (CRJ-45, RS-232) and remote Telnet access
• TFTP configuration & firmware loading
• SNMP v1 agent (MIB II and private MIB)
• Built-in diagnostic tools (trace, debug)
Operating Environment • Operating temperature: 0 - 40°C
• Operating humidity: 5 - 80% (non condensing)
System • CPU Motorola MPC859 @ 50 MHz
• Memory 32MB SDRAM/4MB Flash
• Power: 100 - 240 VAC (50/60 Hz)
• Power dissipation: 4 - 12W model dependent
Compliance • EMC compliance: EN55022 and EN55024
• Safety compliance: EN 50950
• CE compliance
• FCC Part 15 Class A

 

Patton Products
Patton VoIP Products

Patton Electronics Complete Products List

DCE Express


Patton Products Adtran Products Motorola / Telenetics Icron DCB
Ethernet Extenders Adtran 3205 Router T1 Router T1 Extenders USB Extenders
IP Video Extender T1 Bonding Simple VPN Site Map A-O Site Map P-Z
© 2008 DCE Express