- G.SHDSL to 4.6Mbps--Spectrally compatible with existing TDM
and HDSL equipment; 2-wire operation at speeds from 192 kbps to
4.6 Mbps in 64-kbps increments.
- Extensive IP Routing Support--Support for RIP, OSPF, and BGP
routing allows easy interoperability with and integration into
any existing network.
- IP Subscriber Management--DNS caching, NAT, NAPT, DHCP, IGMP,
DiffServ, & RADIUS make it easy to create and manage any
service.
- VPN/Firewall--Create layer 2 and layer 3 VPNs with L2TP and
GRE. Built in IP address and IP port filtering, makes firewall
services a snap.
- SNMP/HTTP Management--SNMP/HTTP manageable from anywhere in
the world including attached CPE units.
- Extended/Enhanced Warranty-- Secure your service with Extended
Warranty. Available from 2-5 years, Enhanced Warranty extends
the standard warranty to five years and includes Advance
Replacements!
Patton's Patton
3224 IpDSLAM combines 24 G.SHDSL ports, two 10/100 Ethernet ports,
and a built-in multi-protocol router into a single cost- effective
Internet service delivery platform.
The Patton 3224 is an expandable 1U system that seemlessly connects
24 subscribers to IP network access. Using ANSI/ETSI G.SHDSL, the
Patton 3224 enables providers to extend their reach-and-range by
delivering rate-adaptive nx64 symmetrical speeds from 192 kbps to
4.6 Mbps-all over a single pair of wires. With its dual auto-sensing
10/100 Ethernet ports the Patton 3224 can connect to your existing
network or use an optional high-speed uplink for a complete
point-of-presence. With its dual-redundant hot-swap power supplies
the Patton 3224 is perfect for high-demand and high-availability
applications.
The Patton 3224 is a complete full-function edge-router with
subscriber traffic management. Use the traffic filtering, shaping,
and policing capabilities of the IpDLSAM to tailor the service to
the needs of each subscriber. Filter by IP address, IP port, or
physical port to grant or restrict access to sites and applications.
Network address translation (NAT) can be setup for IP address
management. Use RIP, OSPF, or BGP to route traffic between any
number of ports, or use static routes for connecting smaller
networks. With SSH even management traffic can be securely accessed.
The Patton 3224 IpDSLAM comes with
the redundancy and ease of management required by service providers
for high quality of service. Included with the purchase of every
unit is free initial configuration support, one year of free
technical services, one year warranty, and free software upgrades.
|
Features
|
Benefits
|
| Redundant, Removable PS
|
Non-Stop Operation
|
| BITS & Alarm Ports
|
Deploy in CO environments
|
| 24 G.SHDSL Ports |
Symmetric DSL to 4.6 Mbps
|
| Two 10/100 Ethernet Ports |
Redundant Up-Link |
| Expansion Modules |
Customize Network Up-Link
|
| L2TP |
Create Layer 2 VPNs
|
| GRE |
Create Layer 3 VPNs
|
| RIP, OSPF, BGP, Static |
Routing flexibility |
| RADIUS Accounting &
Authentication |
Authenticate & track users
with existing tools |
| NAT & NAPT |
Masquerading |
| IP address & port filtering |
Create firewalls & manage QoS
|
| DNS Caching |
Faster address lookups
|
| DHCP |
Manage user IP addresses |
| NTP |
Synchronize to time source |
Use the Patton 3224 IpDSLAM to create Layer 2 VPNs with L2TP or
Layer 3 VPNs with GRE between IpDSLAMs or other third-party
equipment.
The IpDSLAM
comes with one of the most complete element management systems
available.
DSL Ports: 24 G.SHDSL or 2B1Q ports presented on an RJ-21X
50-pin connector, each supporting data rates of nx64 (192 kbps - 4.6
Mbps)
Ethernet Ports: Dual 10/100BaseT (RJ-45 connector);
auto-negotiating; half or full duplex operation
WAN clocking: Internal, Network Receive Recover (from
expansion port), External BITS via Form-C relay contacts
Front Panel Indicators: LEDs for power, CPU, system,
Ethernet, External clock, test mode, DSL, and Up-link Egress module
Power Supplies: Hot swap, dual-redundant AC or DC; AC power:
115 or 230 VAC (50/60 Hz); DC power: -36 to -72 VDC
Management Service: HTTP, SNMP, Telnet Server, RS-232 Console
Port, SYSLOG Client, Software upgrade via FTP or TFTP
Alarm Reporting: Configurable alarms; Remote SNMP Traps;
Front Panel LEDs; Form-C relay contacts
Compliance:Safety: UL/CSA per UL1950 (METS) Canadian cMET and
CS-03. EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
(EN60950), FCC Part 15, CE Mark, CTR12, CTR13, FCC Part 68
Environment: Operating temperature: 0 to 40°C (32 to 104°F);
Humidity: 5 - 90% non-condensing
Dimensions: 48.25 W x 32.00 D x 4.44 H cm (19.00 W x 12.60 D
x 1.75 H inches) - 1U by 19 in. wide
|
