The Patton 2996 RAS integrates 96 analog and digital modems, RAS software, a 10/100 Ethernet port, IP Routing, Frame Relay forwarding, and four E1/T1 CSU/DSUs. It connects 96 dial-in-modem V.92*, V.90, K56Flex, V.34+ or ISDN users to the Internet, IP LANs, or Corporate Intranets. Load-sharing dual-redundant power supplies and integrated Web-based SNMP/HTTP management system capabilities make our 2996 RAS the most reliable and easiest to use RAS in the business!

Number of Connections: 96
Power Supplies: Dual Redundant (Fixed) AC
Ethernet Ports: One 10/100Base-T
WAN Ports: Four
Modem Modulations: V.92*, V.90, K56Flex™, V.34 Annex 12, V.34, V.32bis, V.32, V.23, V.22, V.22bis, V.21, Bell 212A, Bell 202, Bell 103, EIA-PN-2330, V.8, V.8bis, Sync/Async receiver/transmitter for V.14, V.42/V.42bis error correction & compression
PSTN Signaling: E1 Primary Rate interface (Q.931), E1 MFR2 (R2), T1 Primary Rate Interface, T1 Robbed bit with Loop/Ground Start or E&M Wink, E&M Immed, Taiwan R1 and Drop & Insert
Management Services: HTTP, SNMP, TELNET Dial-in and Ethernet or RS-232 console port, SYSLOG client, Remote software upgrade via FTP, User configurable login prompts and banners
Authentication: RADIUS, PAP/CHAP, Username/Password, and Static Users Database (111 Entries)
Software Upgrades: Achieved through Flash upgrades via FTP. Software available at http://upgrades.patton.com
Warranty: 1-Year Standard Warranty. Upgrade available to a 5-year Enhanced Waranty (includes Advance Replacements)
Protocol Services: TCP/IP suite with extensive protocol statistics - ICMP/TFTP/FTP/RLOGIN/TELNET • Ethernet ARP, Proxy ARP and RARP protocols • Point-to-Point Protocol (PPP) • SLIP protocol • Van Jacobson TCP header compression PPP address and protocol compression • RADIUS authentication and accounting, with support for primary and secondary servers • RIP, RIPv2 and OSPF dynamic route distribution - user configurable static routes • MultiLink PPP • Multi-chassis MultiLink • Layer 3 and Layer 4 IP Filtering