Patton 2173 100 Mbps Ethernet Extenders
The Patton 2173 CopperLink Ethernet Extenders provide high speed LAN connections between peered Ethernet LANs, remote PC’s, or any other network enabled 10/100Base-T device. Operating in pairs, one Patton 2173 is configured as the (L) Local unit located at one end of the LAN extension and the other Pattonl 2173 is configured as the (R) Remote unit at the other end. The Patton 2173 is configured as a L or R via the switch on the bottom of the unit.
Patton 2173 Ethernet Extender Features:
• Variable rate CopperLINK extender - Easy to configure • Auto-MDIX Ethernet • Configurable 10/100, Full/Half, and Auto-Negotiating Ethernet • Extends network connections up to 4,250 ft (1.3 km) over 2-wire 24-AWG unconditioned lines • Switch selectable line rates up to 100 Mbps downstream/70 Mbps upstream • Symmetric or asymmetric settings via DIP switch • Transparent operation • LED indicators for Power, Link, Ethernet Link & Activity, and Remote/Local
A pair of Patton 2173 Ethernet Extenders work together to create a transparent extension between two peered Ethernet LANs. The figure below shows a typical point-to-point application.
Patton 2173/E Multi Rate 100 Mbps Ethernet Extender; No power supply
Patton 2173/EUI-2PK Multi Rate 100 Mbps Ethernet Extender Kit (2 units preset to local and remote) 110-240VAC
Distance Chart Patton 2173 Based on 24 AWG Note: DS = downstream, US = upstream The actual distance and link performance may vary depending on the environment and type/gauge of wire used.
