Ethernet Extenders These Ethernet Extenders Extend an Ethernet Port Over a single Copper Pair Ethernet Extenders come in 2 Pack sets, local and remote
Pictured are standalone and rack versions of the Industry Standard Patton Ethernet Extenders
Patton 2158A CopperLink 12.5-Mbps Ethernet Extender
High-speed full-duplex 12.5 Mbps communications link
Extends Ethernet connections up to 4,500 ft. (1,372 m)
Easy 2-wire CopperLink connection via built-in RJ-45 or 2-position terminal block
Patton 2168A CopperLink 16.67-Mbps Multi-Rate Ethernet Extender
Low cost/plug and play solution for campus wide network extension and delivery of last-mile ISP services over Ethernet
Extends Ethernet distances up to 1 mile over 2-wire 24 AWG unconditioned lines
Switch selectable asymmetrical or symmetrical line rates up to 16.67 Mbps!
Auto-sensing 10Base-T or 100Base-TX
Patton 2156 CopperLink 2.3-Mbps Ethernet Extender Our most dependable long range Ethernet Extender (6 miles)
Extend your network up to 32,000 ft. (9,754 m)
2.3 Mbps extension using existing twisted pair of copper
Plug-and-play-No configuration necessary!
Patton 2157 CopperLink 4.6-Mbps Ethernet Extender
Auto-rate adaptation gives the highest rate possible for for the extension distance of your network
4.6 Mbps over just a single twisted pair of copper
Extension distances up to 32,000 feet (10 km)
Auto-sensing 10/100 Ethernet port
Patton 2172 CopperLink 50-Mbps Ethernet Extender
Ethernet Extension - Extends 10/100Base-TX Ethernet up to 5,500 feet over 2-wire AWG 26 unconditioned lines.
Operates Over Twisted Pair - Reduces the cost and hassles of new installations. Utilizes installed voice-grade twisted pairs to eliminate the expense of fiber or Cat5e cabling.
Full-duplex data-line rate of 100 Mbps - Provides near fiber performance for bandwidth intensive applications such as Triple Play services.
Plug and Play - No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and auto MDI-X.
Multiple Line Rates Supported - Switch-selectable lines rates ensure the best possible line rate for each application.
Asymmetric or symmetric - Adapts to service provider and enterprise applications.
Transparent LAN Bridging - Passes higher layer protocols and supports 802.1Q VLAN tagged and untagged traffic.
TEMPERATURE HARDENED ETHERNET EXTENDERS
The NEW Patton 2110 Ethernet Booster doubles Ethernet distance limitations of 328 feet (100 meters). Multiple Patton 2110 Ethernet Boosters can be placed in-line to further extend both Ethernet and PoE up to 1,640 ft (500 m), eliminating the need for additional switches, hubs, wireless access points, and expensive fiber installations.
USB EXTENDERS
