Fiber T1 Extenders

Fiber T1 Extenders
Data Connect Fiber-T
Extend a T1 across multimode fiber up to 2KM
DCE/FIBER-T T1 Extenders

Fiber SC, Multimode, 2Km T1 Extenders

Now you can extend a demarc / smartjack to your T1 equipment over simple multimode fiber. Simply set up one DCE Fiber T1 Extender at each end of your fiber run, and you are set to go.

These will extend a T1 demarc using multimode fiber up to 2Km (1.3mi) distance. These units are equipped with dual SC type optical connectors

T1/E1 RJ-45 (USOC RJ-48C) to Fiber converter
User selectable line code setting, Far End Fault (FEF) setting, Loop back test, Unframed (transparent clear channel) , Support AMI or B8ZS/HDB3 line codes

Extend T1 Over Fiber

Standards:	T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403
Interfaces:	RJ48c 100ohm balanced T1 connector and dual SC 155M fiber port
Operating wavelength:	1310nm multimode
Operating distance:	2Km on 62.5/125um fiber, works also on 50/125um fiber
Optical connector:	SC dual type (versions with ST or FC optical connectors are available on request)
Front LEDs:	Power, Fiber Link, T1 Link, Test mode
Power:	External 90-260V AC switching adapter 9VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:	0 — 50°C (Operating); 0 — 70°C (Storage)
Humidity:	20 — 80% non condensing (Operating); 0 — 90% (Storage)
Consumption:	less than 5W
Dimensions(WxDxH):	85.6mm x 122.6mm x 20mm
Weight:	310g (without AC adapter)
Compliance:	CE, FCC Class A
MTBF:	65,000 hours

DCE/FiberT Fiber T1 Extenders

We have units that use Single Mode Fiber
and work to 20KM

We have units that will extend
multiple T1's over fiber
Extend up to 4 T1's over Fiber

contact us for information and pricing

Copper T1 Extenders Copper T1 Repeaters