Ethernet Extenders

Ethernet Extenders

What are
Ethernet Extenders?

Ethernet Extenders (also network extenders) are used to extend an Ethernet segment beyond its normal distance limitation of 100 meters for most common forms of Ethernet.

Ethernet Extenders that use copper wire include 2- and 4-wire variants using unconditioned copper wiring to extend a LANs. All the Ethernet Extenders we offer on this page operate over a single twisted pair. Ethernet Extenders use various DSL modulation schemes to transmit information. Copper-based Ethernet extenders must be used on unconditioned wire, such as unused twisted pairs and alarm circuits.

Ethernet Extenders allow users to drive their Ethernet segments beyond the IEEE 802.3 specifications for distance limitation of 328 feet or 100 meters. Ethernet extenders drive longer range, high-speed data communication between geographically separated LANs or LAN devices and create very cost effective bridged-Ethernet connections. Ethernet Extenders are typically deployed in commercial, residential, industrial and hospitality access environments. But they are also in use on farms (to Extend Ethernet to the barn) homes, and businesses. Ethernet Extenders can be referred to as Network extenders, LAN extenders and Ethernet cable extenders and use a variety of transmission technologies over physical media such as copper or fiber. Extenders use copper wiring 1 pair unconditioned wiring (POTS) up to category rated twisted pair (CAT3...CAT6). While transmitting over copper wire does not allow for the speeds that fiber-optic transmission does, it allows the use of existing voice-grade copper wiring, and speeds are increasing.

How Are Ethernet Extenders Used?

Ethernet Extenders eliminate the need for installing expensive 802.3 repeaters, twisted pair (CAT5/CAT6) cabling, or fiber and associated fiber transceivers. Ethernet Extenders provide the most cost effective solutions for any LAN extension project, including Wireless Access Point installation, IP Security Camera and POS (Point of Sale) applications. Ethernet Extenders create effective seamless LAN connections across disparate LAN’s in office parks, across streets, around college campuses, joining remote buildings or within large enterprise businesses.

Use existing copper wiring with a huge cost saving over traditional copper and Fiber solutions.

Our Ethernet Extenders install in minutes - have your remote office LAN up in minutes

What Should I look for in buying Ethernet Extenders?

Cost - Full wire speed does not have to cost a fortune - Our units are very affordable

Speed - The key reason for Full LAN speed - don't settle for low bandwidth!

Ease of Installation - Country specific power adapters, no configuration or programming

Reliability - Our products are the industry standard.

Why Patton Ethernet Extenders?

Patton Ethernet Extenders have been the industry standard 2-wire Ethernet Extender solution since 2001.

Patton Ethernet Extenders are American made and supported.

Patton Ethernet Extenders offer superior product quality and reliability with lower TCO.

Patton Ethernet Extenders are easy-to-use, virtually plug and play solutions.

Patton Ethernet Extenders come with free pre- and post-sales technical support from DCE and Patton's Maryland factory.

DCE 2178EE Extender

Industrial Ethernet Extender

All the features of the best selling Patton 2172 Ethernet Extender for Industrial Applications

DIN RAIL ETHERNET EXTENDER

Patton 2173 100-Mbps Ethernet Extender

Our Top Copper
Ethernet Extender Products

Call for a recommendation
and pricing for your application

Patton 2172 CopperLink 50-Mbps Ethernet Extenders

Ethernet Extension - Extends 10/100Base-TX Ethernet up to 5,500 feet over 2-wire AWG 26 unconditioned lines.

Operates Over Twisted Pair - Reduces the cost and hassles of new installations.

Utilizes installed voice-grade twisted pairs to eliminate the expense of fiber or Cat5e cabling.

Full-duplex data-line rate of 100 Mbps - Provides near fiber performance for bandwidth intensive applications such as Triple Play services.

Plug and Play - No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and auto MDI-X.

Multiple Line Rates Supported - Switch-selectable lines rates ensure the best possible line rate for each application. Asymmetric or symmetric - Adapts to service provider and enterprise applications.

Transparent LAN Bridging - Passes higher layer protocols and supports 802.1Q VLAN tagged and untagged traffic.

Patton 2158 2158A CopperLink 12.5-Mbps Ethernet Extenders

High-speed full-duplex 12.5 Mbps communications link Extends Ethernet connections up to 4,500 ft. (1,372 m) Easy 2-wire CopperLink connection via built-in RJ-45 or 2-position terminal block

Patton 2168 2168A CopperLink 16.67-Mbps Multi-Rate Ethernet Extenders

Low cost/plug and play solution for campus wide network extension and delivery of last-mile ISP services over Ethernet

Extends Ethernet distances up to 1 mile over 2-wire 24 AWG unconditioned lines

Switch selectable asymmetrical or symmetrical line rates up to 16.67 Mbps! Auto-sensing 10Base-T or 100Base-TX

Patton 2157 CopperLink 4.6-Mbps Ethernet Extenders

Auto-rate adaptation gives the highest rate possible for for the extension distance of your network

4.6 Mbps over just a single twisted pair of copper

Extension distances up to 32,000 feet (10 km)

Auto-sensing 10/100 Ethernet port

Patton 2156 CopperLink 2.3-Mbps Ethernet Extenders

Extend your network up to 32,000 ft. (9,754 m) 2.3 Mbps extension using existing twisted pair of copper

Plug-and-play-No configuration necessary!

Patton 2172R
Ruggedized Ethernet Extender

For distances less than 1 mile, the 2172R was designed to operate in a rugged environment, with temperature ranges from -10 to 70°C, and the option for conformal coating protecting the device from condensing humidity, and operates at -10 to 80°C. The 2172R’s aluminum case design allows for users to conveniently mount them either on a wall or DIN

Patton 2157R Long Distance
Ruggedized Ethernet Extender

For distances up to 6 miles, the 2157R was designed to operate in a rugged environment, with temperature ranges from -10 to 70°C, and the option for conformal coating protecting the device from condensing humidity, and operates at -40 to 85°C. The 2157R’s aluminum case design allows for users to conveniently mount them either on a wall or DIN.

Patton 3202 Ethernet Extenders Long Range Multi-pair High Bandwidth Ethernet Extenders with integral router

Patton 3231 Managed Ethernet Extender Now having managed Ethernet Extenders easy with the Patton 3231

The NEW Patton 2110 Ethernet Booster doubles Ethernet distance limitations of 328 feet (100 meters). Multiple Patton 2110 Ethernet Boosters can be placed in-line to further extend both Ethernet and PoE up to 1,640 ft (500 m), eliminating the need for additional switches, hubs, wireless access points, and expensive fiber installations.

PATTON ETHERNET EXTENDERS WITH BUILT-IN 4 PORT SWITCH Distances to 5 Miles

CopperLink Patton 2160	11.4 Mbps 2-Wire Ethernet Extender built in 4 Port Ethernet Switch
CopperLink Patton 2161	22.8 Mbps 4-Wire Ethernet Extender built in 4 Port Ethernet Switch
CopperLink Patton 2162	45.0 Mbps 8-Wire Ethernet Extender built in 4 Port Ethernet Switch

Ethernet Extension > Ethernet Extenders

Ethernet extenders allow users to expand their Ethernet connections beyond the 328-foot (100-meter) Ethernet distance limitations. Ethernet extenders can establish long-range, high-speed data communication links between geographically separated LANs or LAN devices. Ethernet extenders are often employed to connect workgroups on different floors within a building.

The Benefits of Ethernet Extenders

One benefit of Ethernet extenders is they can eliminate the need for installing expensive Switches and CAT5 cable. Ethernet extenders can use fiber-optic or copper twisted-pair cables to transparently send packets at full-line rate to a peered LAN up to five miles away. While networks typically deploy Ethernet extenders within a limited geographical area, this area need not be limited to one building. Ethernet extenders can create effective bridged-Ethernet connections across streets or over a college or enterprise campus and between Ethernet LANs up to five miles apart.

Ethernet extenders are cost-effective alternatives to more complicated and pricey wiring installations such as CAT5 cable. Ethernet extenders are plug-and-play devices that you can install quickly to take advantage of existing copper twisted-pair network infrastructure. Depending on the required data rate, some Ethernet extender models can increase the distance of an Ethernet link extension beyond five miles.

We offer a wide range of award-winning Ethernet extenders to serve your networking needs, including both copper and fiber models. Our auto-rate adaptation feature ensures the highest speed possible across great distances. Unlike many LAN extenders, Patton extenders with auto-rate adaptation can be set for multiple data rates and require no difficult configuration when connecting to LANs at different distances.

A Satisfied Copperlink Ethernet Extender User

Extend USB Over Copper
Patton Electronics Complete Products List