|
The IP•Tube DLT1-Ecan encapsulates full and fractional T1 circuits into IP
packets. T1 Over IP connections provide for the interconnection of PBXs and
Telecom Switches via LANs, WANs, MANs, Satellite and Wireless Ethernet.
The
IP•Tube DLT1-Ecan ships with two T1 interfaces with either 1 or 2 active and
two 10/100 BaseT Ethernet Interfaces.
The inactive T1 Port can be activated via a software-based license key for a
pay as you grow option.
Transparent Interconnect The IP•Tube DLT1-Ecan’s transparent operation
maintains
the proprietary signaling required to support PBX features such as call
conferences, call forwarding, caller ID and SS7.
Multi-Site Enterprises, Education
Districts, Universities, National, State and Local Government, and
Municipalities, incur significant recurring monthly costs for rigid-bandwidth
leased lines used only for the interconnection of Phone Systems.
The IP•Tube DLT1-Ecan provides organizations with the ability to
interconnect their existing phone systems over flexible bandwidth lines that
are used to carry data, voice, and video. The Voice Only Leased Line Toll
charges assessed by long
distance and local carriers are eliminated or dramatically reduced by
transporting voice traffic across:
LANs
The most compelling option for the interconnection of T1 based systems is
when it can be accomplished over a Local Area Network. The deployment of
Fiber based LANS such as
FDDI and Gigabit Ethernet, provides organizations with high performance and
high quality bandwidth that is especially well suited for the
interconnection of PBXs and Telecom Switches.
WANs
Wide Area Networks that have sufficient bandwidth and Quality of Service
provisioning result in very significant cost savings especially for
Multinational Corporations. The
IP•Tube DLT1-Ecan-C with loss less data compression, detects idle and
redundant data within each voice circuit resulting in a 56 to 1 bandwidth
savings. WAN bandwidth is not consumed by silence or redundant samples.
Echo Canceller
The IP•Tube DLT1-Ecan has an integrated T1 Echo Canceller
that cancels up to 64 milliseconds of Far End echo. The
echo canceller meets ITU-T G.164, G.165 and ITU-T G.168
requirements for echo cancellation.
Signaling Support
PRI ISDN, SS7, ESF, D4, SLC-96, Proprietary out of band,
and robbed bit signaling is supported. Echo cancellation
is automatically disabled during FAX and Modem
communications. Transparent support for Modem or Fax.
Voice quality is not compromised.
Legacy phone equipment investment is preserved.
|