E1 Extender E-Extenders

E1 Extender E Extenders

FEATURES

• E-1 4-wire repeater
• Extends in-house E-1 lines
• Up to 5000 feet between units
• RJ-45 or screw down connectors
• Simple connection to a 4-wire line
• Inexpensive solution to long cable runs
• 120/240 VAC, 12/24/48, or 125 VDC powered
• 1U high rack mountable; 1,2, or 3 x19" rack
• 20 slot chassis option

DESCRIPTION

The DCB E-Extender is a 4-wire repeaters for use on customer owned lines or to extend telephone company demarcs. The Extenders are used to extend in-house E-1 lines in campus and high-rise environments.

Each pair of E-1 Extenders may be located up to 4000 feet apart. The Extender circuitry is rated to -43 dB dynamic range at the E-1 rate of 2.048 Mbps. As implemented, the parts are slightly de-rated to provide long life at extended temperature range. Therefore the distances specified in this document are only 5000 feet. Solid copper 22 AWG, two twisted pair is the preferred cable for connection between the Extenders. Connection to the Extender is made through RJ-45 modular connectors or 4-wire screw down barrier strips. Each Extender comes standard with two screw down barrier strips and one RJ-45 connector. If only RJ-45 connections are desired, extra RJ-45 adapters (part number 9502122) may be ordered.

The 120/240 VAC E-Extenders are powered by a small wall-mount transformer. The Extenders are designed for connections between E-1 equipment such as PBXs, E-1 multiplexers, E-1 line drivers, CSUs, routers or any other E-1 equipment requiring long customer owned cable runs. E-Extenders may be used to connect this equipment across a campus, between floors of a high-rise office building or between office buildings with underground cable runs. The E-Extenders are transparent to the type of data sent over the E-1 link. The data can be D-4 format, ESF, PRI, G.703, G.704, etc.

The Extenders are most often used in pairs to extend a telephone company demarc. For example, if a CSU or DSU is limited to 655 feet and is connecting to a phone company smart jack demarc which is limited to 655 feet, the E-Extenders are used in pairs to extend that distance up to 5000 feet.

SPECIFICATIONS

General

E-1 repeater
Extends E-1 bi-polar signal
Up to 4000 feet between E-Extenders

Wire

Two twisted pair solid copper 22 AWG
Other types will affect operational distance

Indicators

Front panel power LED

Connectors

RJ-45 modular 8-conductor connectors
Pin 1 = Receive
Pin 2 = Receive
Pin 4 = Transmit
Pin 5 = Transmit

4-Wire barrier strip
Pin 1 = Receive
Pin 2 = Receive
Pin 3 = Transmit
Pin 4 = Transmit

Connect the transmit pair of one Extender to the receive pair of the other Extender. Pairs are not polarity sensitive Units supplied with 2 screw downs, 1 RJ-45
A cable cross-over is required between two Extenders if using straight RJ-45 cables. This cable connects the receive pair to one Extender to the transmit pair of the other Extender.

Physical/Electrical

• 5.5" x 7.5" x 1.5"
• 120 ohm E-1 interface
• 2 lbs including wall transformer
• 120 VAC external wall transformer supply
• Optional 220 VAC, 12, 24, 48, 125 VDC
• 30 ma
• -40 to +70 C operating temperature

How to Order

T-Extender
T-1 Extender