Extend 4 T1's over Fiber

Quad Fiber T1 Extenders

Data Connect Quad Fiber-T
T1 Extenders
Extend up to 4 T1's across multimode fiber up to 2KM
DCE/QUADFIBER-T

The QuadFiber-T T1 Extender is perfect choice for small capacity, budget oriented applications. QuadFiber-T T1 Extender was developed with customer requests in mind: a low cost Fiber T1 Extender, with optional SNMP management support, desktop or rack mountable, 4T1/E1 and order wire interfaces.

QuadFiber-T Extender is already a huge success. QuadFiber-T has built in E1 and T1 interfaces. With a simple DIP switch selection or console CLI, the QuadFiber-T equipment can be used either under European E1 or US T1 standards. QuadFiber-T has a fixed configuration on 4T1/E1 interfaces and a single optical uplink port.

The QuadFiber-T unit can be managed through serial console as well as optional SNMP. The SNMP can be activated by installing an SNMP daughter board on the QuadFiber-T T1 Extender.

Basic QuadFiber-T
4 T1/E1 built-in, multi-mode fiber, dual SC connector,
2Km, 1310nm, AC 90-240V

Other models available:

4 T1/E1 built-in, multi-mode fiber, dual SC connector, 2Km, 1310nm, DC neg 48V

4 T1/E1 built-in, single-mode fiber, dual SC connector, 30Km, 1310nm, AC 90-240V

4 T1/E1 built-in, single-mode fiber, dual SC connector, 30Km, 1310nm, DC neg 48V

4 T1/E1 built-in, single-strand fiber type A BiDi, SC connector, 20Km, 1310/1550nm, AC 90-240V

4 T1/E1 built-in, single-strand fiber type B BiDi, SC connector, 20Km, 1550/1310nm, AC 90-240V

4 T1/E1 built-in, single-strand fiber type A BiDi, SC connector, 20Km, 1310/1550nm, DC neg 48V

4 T1/E1 built-in, single-strand fiber type B BiDi, SC connector, 20Km, 1550/1310nm, DC neg 48V

SNMP management module for FMUX04 multiplexer (optional)

single unit 19"rack mounting kit (optional)

The DCE/QuadFiber-T/E is a 1U half 19" stand-alone or rack mountable T1/E1 Extender featuring a point-to-point multiplexer for 4*E1 or 4*T1 (selectable) transmissions over a single fiber optic link. Its half-rack format makes it ideal for low cost multiplexing applications that require up to 4-channel.

All channels provide completely transparent transmission of E1 or T1 regardless of frame mode, clock source or timeslot assignment. Available in eit her AC or DC models, the AC supplies operate from 100~240VAC while DC supplies operate from 18~72VDC. A wide range of transceiver selection provides fiber connection with SC, FC or ST type connectors in multimode or single mode and at distance from 2 to 120km as well as BiDi (single fiber) at distances of 20, 40, 60, or 80km.

Additional options include "Order Wire" phone connection (FXS port) and a SNMP management.

Quad Fiber T1 Extender

DCE QUAD FIBER-T Manual

QuadFiber-T Rack Mount
Extend 8, 12, or 16 T1 Circuits

Fiber Optic Multiplexer
Modular Design
Rack Type
Extend 4, 8, 12, or 16 T1's

Call for more information