Ethernet Extender Data and Voice Data Connect 2178HSEE Data Connect 2178 High Speed Ethernet Extender with POTS Line Ethernet and Telephone Extender
The Data Connect 2178HSEE High Speed Ethernet Extender functions over existing copper wires. Voice and data communication can be shared simultaneously. By using the additional Splitter from the DCE 2178HSEE-2PK (two pack), the splitter can allow POTS and Ethernet to share the existing phone line. So you can have Ethernet and Telephone over the same copper pair. Here is an application diagram:
The DCE 2178HSEE is a Long Reach Ethernet (LRE) extender providing one RJ-45 Ethernet port and one RJ-11 phone jack for VDSL2 connection. The Data Connect 2178HSEE is a high speed 100/100Mbps Downstream / Upstream, Ethernet Extender. The DCE 2178HSEE is designed based on two core networking technology, Ethernet and the latest Very-high- data-rate Digital Subscriber Line. Our technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The DCE 2178HSEE supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections.
The Data Connect 2178HSEE is a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be easily viewed via the diagnostic LEDs on the front panel. The DCE 2178HSEE offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be selected by using a built-in DIP switch. In a point-to-point configuration, there must be a CPE mode on one side and a CO mode on the other side to perform a seamless Ethernet connection. When the DCE 2178HSEE is in profile 17a operation mode, it provides long distance Ethernet transmission. When the DCE 2178HSEE is in 30a operation mode, it provides short distance Ethernet transmission with higher speed performance in upstream and downstream traffic. FEATURES • Cost-Effective VDSL2 Profile 17a/30a CO / CPE Ethernet extension solution • One box design, CO / CPE selectable via DIP Switch • Defines symmetric band plan for the transmission of upstream and downstream signals • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control E. standards • DMT (Discrete Multi-Tone) line coding • Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control • One RJ-11 connector for VDSL port with VDSL connection, additional Splitter for POTS connection • Voice and data communication can be shared simultaneously based on the existing telephone wire • One 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X • Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent • Simple Plug-and-Play • Selectable target profile and target SNR margin • Supports extensive LED indicators for network diagnosis • Compact size, easy installation
ORDERING INFORMATION DCE/2178HSEE-2PK DCE/2178HSEE
