|
Patton CopperLink 2115 T1 Extender
- Triple the Distance--Extend T1s to over 3 miles and E1s to
almost 5 km over one pair of wires.
- Half the Wires--The T1 extenders only require one pair of
wires to operate.
- Voice and Data Extension--The T1 Extenders operate in clear
channel mode allowing the transparent passing of both voice and
data.
- Plug and Play--Plug them in and the link comes up in seconds.
The line interface is even polarity insensitive, making it easier
to get running.
- Line Tests--V.52 511/511E Pattern Generator with Remote
Digital Loopback (RDL); Local Analogue Loopback (LAL).
- Front Panel Status Indicators--Front Panel LED’s provide users
with quick feedback on unit operation.
Patton CopperLink 2156 CopperLink 2.3-Mbps
-
Extend your network up to 32,000 ft. (9,754 m)
-
2.3 Mbps CopperLink extension using existing twisted pair of
copper
-
Plug-and-play-No configuration necessary
Patton CopperLink 2157
CopperLink 4.6-Mbps
-
Auto-rate adaptation gives the highest rate possible
for the extension distance of your network
-
4.6 Mbps over just a single twisted pair of copper
-
CopperLink Extension distances up to 32,000 feet (10 km)
-
Auto-sensing 10/100 Ethernet port
Patton CopperLink 2158
CopperLink 12.5-Mbps
-
High-speed full-duplex 12.5 Mbps communications link
over single copper pair
-
Extends Ethernet connections up to 4,500 ft. (1,372
m)
-
Easy 2-wire CopperLink connection via built-in RJ-45
or 2-position terminal block
Patton CopperLink 2168 CopperLink 16.67-Mbps
Multi-Rate
-
Low cost/plug and play CopperLink solution for campus wide
network extension and delivery of last-mile ISP services over
Ethernet
-
Extends Ethernet distances up to 1 mile over 2-wire
24 AWG unconditioned lines
-
Switch selectable asymmetrical or symmetrical line
rates up to 16.67 Mbps!
-
Auto-sensing 10Base-T or 100Base-TX
Patton CopperLink 2172 CopperLink
50-Mbps
50 Mbps Ethernet Extender
-
Ethernet Extension - Extends 10/100Base-TX Ethernet
up to 5,500 feet over 2-wire AWG 26 unconditioned lines.
-
Operates Over Twisted Pair - Reduces the cost and
hassles of new installations. Utilizes installed voice-grade twisted
pairs to eliminate the expense of fiber or Cat5e cabling.
-
Full-duplex data-line rate of 100 Mbps - Provides
near fiber performance for bandwidth intensive applications such as
Triple Play services.
-
Plug and Play - No configuration or cable hassles
during installation with auto-sensing 10/100, full or half duplex,
and auto MDI-X.
-
Multiple Line Rates Supported - Switch-selectable
lines rates ensure the best possible line rate for each application.
-
Asymmetric or symmetric - Adapts to service provider
and enterprise applications.
-
Transparent LAN Bridging - Passes higher layer
protocols and supports 802.1Q VLAN tagged and untagged traffic.
|
