Home Where Are Your Prices? Contact Quote Request Credit Card Form

ADTRAN
DSU 56/64 for 4-Wire V.35 DTE 120062L1

Adtran 1200062L1

Excellent Pricing for New or Refurbished

1200062L1 DSU 56/64 for 4-Wire V.35 DTE
Manufacturer Part Number: 1200062L1


The DSU 56/64 1200062L1 provides both a physical and electrical V.35 DTE interface, which is mounted on the rear panel. The DTE interface operates at the same rate as the network, either 56 or 64 kbps. Also located on the rear panel is a set of option DIP switches along with an RJ-48S network interface. The option switches allow the user to select the Network/DTE data rate, control lead options, remote digital loopback, and scrambler options.




The ADTRAN DSU 56/64 1200062L1 provides cost-effective solutions for termination of 56 or 64 Kbps DDS services. The units are a very economical solution for single port point-to-point, multi-point or Frame Relay applications. Extensive use of VLSI technology provides a highly reliable feature-rich DSU.




Product Specifications 1200062L1

Product Name DSU 56/64 for 4-Wire V.35 DTE
Electrical Interface Serial V.35
Data Transfer Rate 56Kbps to 64Kbps Network
Ports Serial V.35 Physical
RJ-48S

Dimensions 1.625" Height x 6.5" Width x 8.25" Depth
Diagnostic Features Local: DTE, DTE/Loop, DTE with test pattern, Loop only, test pattern
Remote: V.54 with or without 2047 test pattern

Certifications & Standards FCC Part 15 Class A
FCC Part 68
UL and CUL
Industry Canada CS03

Operating Mode Dedicated DDS Point-to-Point
Dedicated DDS Multipoint

Form Factor Desktop
Rack-mountable

Frequency 60 Hz
Humidity Up to 95% Non-condensing
Input Voltage 115 V AC
Power Consumption 4 W
Temperature 0 C (32 F) to 50 C (122 F) Operating
-20 C (-4 F) to 70 C (158 F) Storage

Additional Information Provides cost-effective method for termination of DDS services
Internal power supply
Can be used for point to- point, multi-point, or Frame Relay applications
Easy to configure; all options set by easily accessible DIP switches
Multiple test and diagnostic features
Receiver Sensitivity: -45dB at all rates

Options:
- Set by DIP switch
- Loop Rate: 56 or 64 Kbps
- CTS: On or Normal
- CTS Delay: Short or Long (DSU 56/64)
- CD: On or Normal
- DSR: On or Normal
- Scrambler: On or Off
- Anti-Stream: On or Off (DSU 56/64)
- RDL: Enable or Disable

Line Requirements:
- Loop transmission parameters as defined in:
- AT&T PUB 62310: Dedicated DDS

Standard Warranty 5 Year(s) - North American
 

 

Patton Products Adtran Products Motorola / Telenetics Icron DCB
Ethernet Extenders Adtran 3205 Router T1 Router T1 Extenders USB Extenders
IP Video Extender T1 Bonding Simple VPN Site Map A-O Site Map P-Z
© 2008 DCE Express