Ethernet Extenders

Patton 2158
Ethernet Extenders

12.5 Mbps Patton 2158 CopperLink extenders are easy to install.
No configuration is required to extend Ethernet
over voice grade wire up to one mile!

Patton 2158 Normally purchased in pairs -- Local and Remote
Rack-Mounted also available

NORMALLY IN STOCK !!
WE HAVE STOCK WHEN NOBODY ELSE DOES!

sales@dceexpress.com

Patton 2158 /L: Local CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; No Power Supply
Patton 2158 /R: Remote CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; No Power Supply
Patton 2158 /L/120: Local CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 120 VAC
Patton 2158 /R/120: Remote CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 120 VAC
Patton 2158 /L/UI:* Local CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 100–240 VAC
Patton 2158 /R/UI:* Remote CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 100–240 VAC
Patton 2158 /2PK: CopperLink High Speed Ethernet Extender Set (Local and Remote); No Power Supply
Patton 2158 /120-2PK: CopperLink High Speed Ethernet Extender Set (Local and Remote); 120 VAC
Patton 2158 /UI-2PK:* CopperLink High Speed Ethernet Extender Set (Local and Remote); 100–240 VAC

*Please specify country-specific power cords

Patton 2158 RC/L: Local CopperLink High Speed Ethernet Extender Rack Card; RJ-45F and Terminal Block
Patton 2158 RC/R: Remote CopperLink High Speed Ethernet Extender Rack Card; RJ-45F and Terminal Block

The Model 2158RC rack cards are compatible with Patton's Model 1001R high-density Telco rack

The Patton CopperLink Ethernet Extender offers one of the most efficient, reliable, and cost-effective solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services—all at 12.5 Mbps! The Patton Model 2158 offers premium performance over your existing voice-grade telephone wire, eliminating the cost of installing new LAN grade cable or expensive fiber.

CopperLink Ethernet Extenders are compact, easy to install, and transparent to higher layer protocols. Simply connect the network equipment to the shielded Ethernet RJ-45F jack, the twisted-pair telephone wire to the CopperLink RJ-45F jack or terminal block, the external power supplies to the units and an appropriate power source, and you're ready to operate. The CopperLink Ethernet Extenders will auto-sense and configure for 10Base-T or 100Base-T as well as full or half-duplex Ethernet operation. No configuration is required!

Whether you are looking to make your network connections go farther and faster, increase the efficiency of your existing wiring infrastructure, or just simply extending your LAN, Patton's CopperLink Ethernet Extender is one of the most simple and cost effective solutions around!

Model 2158 FAQ PDF

Model 2168 - Multirate

Patton Electronics Products

Why Buy Patton Products from DCE Express?