Patton 2158 2158A Ethernet Extender

Patton 2158 2158A Ethernet Extenders
Patton 2158 2158A Normally IN STOCK

The Patton 2158 and Patton 2168
have been replaced by the Patton 2158A and Patton 2168A

All specifications remain the same for these reliable extenders
However, the new Patton 2158 and Patton 2168 "A" units use a different chipset
and are NOT interoperable with the older models.
Here are the new part numbers for the "A" devices:

Patton 2158A /EUI-2PK CopperLink 10 Mbps Ethernet Extender Kit (1 Local Unit and 1 Remote Unit); 100-240VAC
Patton 2158A /E-2PK CopperLink 10 Mbps Ethernet Extender Kit (1 Local Unit and 1 Remote Unit); No power supply
Patton 2158RC/L CopperLink 12.5 Mbps Ethernet Extender 1 Local Unit Rack Card (Use with Patton 1001R System)
Patton 2158RC/R CopperLink 12.5 Mbps Ethernet Extender 1 Remote Unit Rack Card (Use with Patton 1001R System)

Patton 2168A /EUI-2PK 16 Mbps Ethernet Extender Kit (1 Local Unit and 1 Remote Unit);RJ45 Connectors only; 100-240VAC
Patton 2168A /E-2PK 16 Mbps Ethernet Extender Kit (1 Local Unit and 1 Remote Unit); No power supply
Patton 2168/L/EUI CopperLink Multi Rate 16 Mbps Ethernet Extender 1 Local Unit; 110-240 VAC
Patton 2168A /R/EUI

Patton 2168A /TB45/EUI-2PK 16 Mbps Kit (1 Local Unit and 1 Remote Unit); Terminal Block Line side; 100-240VAC
Patton 2168A /R/TB45/EUI
Patton 2168A /L/TB45/EUI

Check Out the 50 Mbps fast Patton 2172 Extenders

Patton 2158 /L Patton 2158 /R Patton 2158 /L/120 Patton 2158 /R/120 Patton 2158 /L/UI
Patton 2158 /R/UI Patton 2158 /2PK Patton 2158 /120-2PK Patton 2158 /UI-2PK

12.5 Mbps Patton 2158 CopperLink extenders are easy to install
and have become the industry standard solution

No configuration is required to extend Ethernet
over voice grade wire up to one mile!

Normally purchased in pairs -- Local and Remote
Rack-Mounted also available

PATTON 2158 SETS NORMALLY IN STOCK !!
WE HAVE STOCK WHEN NOBODY ELSE DOES!

Patton 2158/L Local CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; No Power Supply
Patton 2158/R Remote CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; No Power Supply
Patton 2158/L/120 Local CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 120 VAC
Patton 2158/R/120 Remote CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 120 VAC
Patton 2158/L/UI Local CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 100–240 VAC
Patton 2158/R/UI Remote CopperLink High Speed Ethernet Extender, RJ-45F and Terminal Block; 100–240 VAC
Patton 2158/2PK CopperLink High Speed Ethernet Extender Set (Local and Remote); No Power Supply
Patton 2158/120-2PK CopperLink High Speed Ethernet Extender Set (Local and Remote); 120 VAC
Patton 2158/UI-2PK CopperLink High Speed Ethernet Extender Set (Local and Remote); 100–240 VAC

*Please specify country-specific power cords

Patton 2158 RC/L Local CopperLink High Speed Ethernet Extender Rack Card; RJ-45F and Terminal Block
Patton 2158 RC/R Remote CopperLink High Speed Ethernet Extender Rack Card; RJ-45F and Terminal Block

The Model 2158RC rack cards are compatible with Patton's Model 1001R high-density Telco rack

The Patton CopperLink Ethernet Extender offers one of the most efficient, reliable, and cost-effective solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services—all at 12.5 Mbps! The Patton Model 2158 offers premium performance over your existing voice-grade telephone wire, eliminating the cost of installing new LAN grade cable or expensive fiber.

CopperLink Ethernet Extenders are compact, easy to install, and transparent to higher layer protocols. Simply connect the network equipment to the shielded Ethernet RJ-45F jack, the twisted-pair telephone wire to the CopperLink RJ-45F jack or terminal block, the external power supplies to the units and an appropriate power source, and you're ready to operate. The CopperLink Ethernet Extenders will auto-sense and configure for 10Base-T or 100Base-T as well as full or half-duplex Ethernet operation. No configuration is required!

Whether you are looking to make your network connections go farther and faster, increase the efficiency of your existing wiring infrastructure, or just simply extending your LAN, Patton's CopperLink Ethernet Extender is one of the most simple and cost effective solutions around!

A Very Satisfied, Non-technical Customer

Patton 2158 FAQ PDF Patton 2158 Info PDF Patton 2158 DataSheet PDF

Patton 2168 - Multirate Ethernet Extenders

Why Patton Ethernet Extenders?

Patton Ethernet Extenders have been the industry standard 2-wire Ethernet Extender solution since 2001.

Patton Ethernet Extenders are American made and supported.

Patton Ethernet Extenders offer superior product quality and reliability with lower TCO.

Patton Ethernet Extenders are easy-to-use, virtually plug and play solutions.

Patton Ethernet Extenders come with free pre- and post-sales technical support from DCE and Patton's Maryland factory.

Industrial Ethernet Extender

Patton Electronics Complete Products List

Why Buy Patton Products from DCE Express?

NOW EXTEND USB OVER CAT 5

The NEW Patton 2110 Ethernet Booster doubles Ethernet distance limitations of 328 feet (100 meters). Multiple Patton 2110 Ethernet Boosters can be placed in-line to further extend both Ethernet and PoE up to 1,640 ft (500 m), eliminating the need for additional switches, hubs, wireless access points, and expensive fiber installations.